Model 87 problem
Moderator: ripjack13
6 posts
• Page 1 of 1
I have a model 87 and when I use 3inch shells the gun will not eject the spent shells. When I used it to shoot trap with 2 3/4 shells I didnt have a problems Any ideas or suggestions Thanks
|
|
Welcome to the Ithaca Owners Forum !!
Ummm...don't use 3" shells !? ( BTW...it is chambered for 3" shells...right !? ) |
|
I am wondering if you have a 3 inch barrel installed on a 2&3/4 inch receiver. Does the serial number on the side of the receiver start with MAG? If not you probably have a 2&3/4 only frame.
|
|
It says 3inch shells on the barrel I won this gun in a gun raffle 15yrs ago and tried using it for duck hunting
|
|
Just because the barrel says 3 inch does not mean that the receiver is capable of handling 3 inch shells. You can put a 3 inch barrel on any post 855,000 serial number receiver. Is there a MAG prefix to the serial number on the receiver?
|
|
Yes there is a mag prefix on the receiver
sorry about taking so long was out of town Thanks |
|
6 posts
• Page 1 of 1
Return to Firearm Maintenance, Modification, Safety And Troubleshooting
Who is online
Users browsing this forum: No registered users and 6 guests