XL 300 Recoil Spring?

Anything and everything related to firearm maintenance, modification, safety and troubleshooting can be posted here.

Moderator: Colonel26


Copper BB
Posts: 1
Joined: Wed Sep 26, 2012 10:28 am
PostPosted: Wed Sep 26, 2012 10:41 am
Cheers all... just joined today.

I have a question about the recoil spring. I hope this doesn't come off as too much of a newb thing... I searched the maintenance area for existing posts related.

I have an XL 300. It was used. The first time I fired it it seemed to do very well, although I did note the ejection seemed very hard (casings flew a long long way). Afterward I noticed the control lever was missing, so it had flown off. I was told later that the recoil spring might be bad and the cause. After disassembling and looking for where the spring should be, it seems there isn't one at all.

I'm looking for a manual or an assembly diagram to confirm. Sources, comments or some extra direction would be appreciated.

Leon
Bancroft, Ontario, Canada
User avatar
Vendor
Posts: 801
Joined: Fri Sep 09, 2011 5:06 am
Location: Nashua, NH
PostPosted: Thu Sep 27, 2012 7:40 am
try this

http://www.gunpartscorp.com/catalog/Pro ... catid=5454
--Jim

Return to Firearm Maintenance, Modification, Safety And Troubleshooting

Who is online

Users browsing this forum: Yahoo [Bot] and 1 guest