Page 1 of 1
firing pin
Posted:
Sat Oct 13, 2012 6:19 pm
by Hoggie666
Can anyone tell me how to take apart my 12 gauge pump Ithaca feathlite 37 so I can replace the firing pin?
Re: firing pin
Posted:
Sat Oct 13, 2012 8:03 pm
by 1977cutcher
I can try to explain every step to you but I think I have a better idea. Try using You Tube. You should be able to find a video with step by step instructions and you will be able to watch someone do it and as they say a picture can be worth a thousand words!
Re: firing pin
Posted:
Sun Oct 14, 2012 1:51 am
by ChAoS
It's not difficult - I've had to replace the firing pins on two of my M37s quite recently.
The main thing with an M37 is to make sure that you take off the stock *before* undoing the trigger plate screw.
There's a PDF of the M37 manual on-line, somewhere. That's all you need.
Regards,
Mark.
Re: firing pin
Posted:
Sun Oct 14, 2012 11:30 am
by SHOOTER13
Welcome to the Ithaca Owners Forum Hoggie666 !!
Re: firing pin
Posted:
Sun Oct 14, 2012 1:35 pm
by ChAoS
Hoggie666 wrote:Can anyone tell me how to take apart my 12 gauge pump Ithaca feathlite 37 so I can replace the firing pin?
*This* is what you need to read:
http://stevespages.com/pdf/ithaca_3787.pdfRegards,
Mark.
Re: firing pin
Posted:
Wed Nov 14, 2012 12:29 pm
by 28 gauge
Google, Ithaca Model 37 Featherlight-American Rifleman.It will take you to a site that describes how to disassemble the Model37.On the site it tells how to remove the firing pin.