Show off your Flues & Nig Model...
21 posts
• Page 1 of 1
Show off your Flues & Nig Model...
|
|
Just bought this one last week and love it. I`m guessing it`s birthdate to be around 1917, serial no. 2692XX. It`s a 12 ga Flues. Barrels are pristine as well as the action. It fits me like a glove.
Jadub |
|
A guy I work with just brought in a Flues &Nig, 1913, serial number : 239763. The stock is busted up pretty bad. The barrel is rusted some but fixable. Question, worth much as is? Replace stock, blue the barrel and hunt with it? Back ground: looks like someone tried to fix the stock a long time ago. Terrible job. I wouldn't trust it as it is to hunt with. What say you guys?
|
|
I would say "AS-IS", not much. $50-$100, tops. Put a new stock on it and get the barrels rust blued and you will have a fine hunter.
--Jim
|
|
Thanks Raven
|
|
You're welcome. Part of the problem of their relatively low value is that there are still alot of them around. The actions do not break under normal instances. The good news is that they are still very useable and if you are looking for a side by side that is of very high quality, they cannot be beat. --Jim
|
|
Here is an early grade 6E Flues.
|
|
Went to a gun show on March 9th, found and bought an Ithaca Flues 10 gauge 1 1/2 grade with Damascus barrels. Serial number 208842. The gun has ejectors and is in mint shape. Paid $500 for it, so it was a great deal. Here are the pictures.
|
|
Here are a few more pictures of my Flues 10 Gauge. 32 inch Damascus Barrels very very thick. Very heavy shotgun. Truly a work of art. Donald
|
|
.410
Posts: 63
Joined: Mon Feb 25, 2013 9:42 pm Location: Tidewater Virginia |
Here is a late model field grade Flues 20 gauge. Serial #378xxx, made in 1924. 26" barrels, 2.5" chambers. Nice solid little gun.
|
Well I didn't hold out much hope, but, wrongly spelled and mis-identified at a UK Auction I have now what I believe is a Flues 10g 1911 vintage. Cosmetically a little rough and not a high grade, I am nonetheless thrilled to have found an Ithaca Double. Ser. No. 207775 (all matching), its a great lump of a gun, 28" plain barrels 1/4 and 3/4 choke, 3" (76mm) chambers, wide machined rib, non ejector, all working and as tight a lock-up as you could wish for. I love it!
I should be grateful for the forums input, particularly if I have wrongly identified it myself! Last edited by impala59 on Mon Jun 19, 2017 2:16 pm, edited 1 time in total.
|
|
some more pics
Edit........... Paid £110 (about $150) for it, seems a bargain to me |
|
Great Gun, Great Deal! I have a 10 gauge Flues also 1911. Grade 1.5. Damascus Barrels. Paid $500 Canadian. Love it. Thanks Donald
|
|
Thanks Donald, I guess that Damascus barrels add a lot of value. Would you say that mine was 'Field Grade'? it does have the retriever engraving, although not deep (maybe just worn) but no fancy stars or scrolls
Regards Roland |
|
Don't think it would be a 1.5 like mine, but looks like a 1. A field gradse is very plain. Very strong guns, almost unbreakable. Will be a great shooter for you. It will take a bit of getting used to, be will be a comfortable gun to shoot. Thanks Donald
|
|
I think Damascus barrels in the day were an upgrade option...
however over time I think the solid barrels become the preferred option its comes down to time and the possibility for Damascus to delaminate , and the ability to safely determine if they are structurally sound. ALSO you say 3" chamber …. be carefull and inquire 2-9/16 was standard chamber size for a long time often they were opened up for 2-3/4" shells the chamber has to account for the crip to unroll as the charge is fired. if i'm not mistaken a 2-3/4 shell needs 3" of chamber space. SO you may very well have 2-3/4" chambers and not 3" |
|
ALSO you say 3" chamber ….
be carefull and inquire 2-9/16 was standard chamber size for a long time often they were opened up for 2-3/4" shells the chamber has to account for the crip to unroll as the charge is fired. if i'm not mistaken a 2-3/4 shell needs 3" of chamber space. SO you may very well have 2-3/4" chambers and not 3"[/quote] I assumed (sometimes dangerous I know!) 3" due to proof house markings on underside of barrel of 10-76. After your cautionary post I measured the chambers as best as I could at 82.8mm 3-17/64" which I guess (also dangerous practice!) would bear out as a 3" or 76mm chamber. I have not tried any 3" 10g but have tried 2-3/4". As a believer in using my collection as much as possible, I must confess to using 'Little Skeeters' 10-12 converters as 10g is so expensive. With a 12g, 28g #8 shot, I get great patterns and the recoil of a bb gun. This antique gun gets used and never overstressed, however if I get the chance for a waterfowl day this would be my gun of choice! |
|
I just wanted to make sure you verified.
Ithaca didn't always stamp chamber size on. and stampings after chamber resizing ,is hit and miss its not unheard of for someone to measure out a chamber at 2-3/4 and then stick a 2-3/4 in shell in. or for someone to chamber a 3" shell into an unmarked resized 2-3/4. I just confused myself so i'll stop ,I think you understand |
|
I believe that the 10-76 markings, with metric chamber size are UK and together with the other various UK proof house markings; Kings crown with BNP is definitive nitro proof barrel and action, (the others are earlier black powder proof and reproof) show that the chamber was measured in the Birmingham Proof House.
I'm not an expert in proof marks but have a rudimentary listing which these are on. Rest assured Twisted I will stay on the safe side and I thank you for your interest and concern Also 850 bar converts to 12328 psi |
|
well lets just say that more care and documentation happen on your side of the pond
|
|
21 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 5 guests