One big thing I have noticed . I recently was wanting to buy a new Ithaca 20ga. I am close enough that I can travel to Upper Sandusky but I wanted to try more local dealers .
I get on the Ithaca web site and go to the find dealers and start calling the closest first and working farther away . Not one of them have a model 37 in stock, trying to get a price is difficult at best most of them simply read the prices off of the web site . Then I also ask for a price with upgraded wood and got everything from we have no idea to $1359 .
Finally I gave up on buying local and bought a used Upper Sandusky 20ga off of gunbroker .
I think if your going to be listed as an Ithaca dealer they should at least have one in stock that a customer can hold and see in person . better yet have them in stock so you can walk in and buy one !
I had the cash in hand but could not find one I could just walk in and buy
Marketing
Moderator: ripjack13
22 posts
• Page 1 of 1
I understand where your frustration comes from. It is difficult to find anyone that has anything in stock. The only thing that I can figure is that with the price range that the new Ithaca guns run in is that most dealers are afraid to get stuck with higher priced pumps (even if they are worth the money). Many folks today are price driven only. I personally thing that the 870 express really helped put some of the other Ithaca companies bankrupt. You get a good enough gun to get by, shoots mostly straight, and do not notice a scratch or two. I to am close enough to pick one up at the factory. While you will not get any discounts I was thrilled to pick up our his and hers 20 gauge guns at the factory, and get a tour, ask questions, hold a few prototypes including the 45 and the over and under; and get our pictures taken out front. For me it was worth the price difference and I plan on doing it again when I scrape together enough money to get one of those new 45's. If you stop and think about it what other name brand gun is still small enough that a person like me could stop by the factory and pick up a new gun while being treated like a king. Hope you enjoy that new gun. We went strait to the club to break in our new guns and boy they are just about perfect.
|
|
Think yourself lucky. *I'd* be happy if I could buy spare parts, let alone a new gun... Regards, Mark. Came late in life to shooting but is making up for lost time...
|
|
what laws are we dealing with here ?
M37 parts are widely availible. i know most private sellers of parts don't want anything to do with international shipping. i just figured it was laziness,,kinda like not shipping to california. have you tried calling ithaca?being a manufaturer maybe they can send em. or is this just a british law thing restricting gun parts? if this is the case maybe you should just order parts for your m37 ithaca dishwashing machine |
|
US "can't export weapons" laws, I think. I was a bit suprised - from reading Americans posting on other American forums - that US gun laws are as bad as UK laws as far as consistancy goes, and so on.
In the US, maybe. Over here? No...
I can understand that. Our club does trips to America so that we can shoot stuff not normally permitted in the UK. (For example, pistols.) People *have* offered to bring bits back for me but I don't want to take the chance of getting my shootin' buddies into hot water with either the US *or* UK authorities if they attempt to bring back the Wrong Thing. One shooter suggested that I go on one of thse trips, buy a second hand M37 that's in good nick, strip off everthing except the barrel and receiver and bring the parts back in my shooting gear. It's an idea but how much simpler it'd be if, like all the other manufacturers, I could just order bits from a UK importer. (I tried contacting MidwayUK to ask if they could get Ithaca parts. The answer was, "no"...)
I have tried *emailing* them. However, that was *before* my main M37 DSPS started having *serious* FTExtract issues. Unfortunately, my Chiappa 1887 is *also* out of commsision, so I don't have a reliable PSG gun, at present. It may be time to try contacting Ithaca, again.
A bit of both, really; the US is afraid to export anything that can be remotely considered as "weapons" and the UK import procedures mean that if you *really* want to have fun, try importing a complete gun... At least, as far as I'm aware. You understand that I haven't *actually* tried importing anything at *all*. From what I hear, importing "non-dangerous" parts is a bit of a lottery - if you get lucky, it's a doddle. If not, then you'd best be prepared to wait a bit and end up being charged quite a bit in extra fees.
That'd be a good opportuniy to get into hot water, methinks. UK gun law is sometimes applied with ludicrously Draconian enthusiasm... Regards, Mark. Came late in life to shooting but is making up for lost time...
|
|
yea the the parts were talking about are tiny
a new top and bottom extractor and springs weigh less the 2 grams. and i not so sure there even recognisable except to a m77 user/owner its not like were talking barrels and trigger packs |
|
.270 WIN
Posts: 146
Joined: Thu Nov 10, 2011 2:10 pm Location: S.E. Va. CSA |
Hi ChAos,
Welcome aboard. How are the laws regarding shipping parts from Canada? If it is easier than the US Try this guy. Ron Sharp Address: Ron Sharp,SGL,RR#4, Dunnville,Ontario,N1A 2W3. Telephone:(905)774-6368. Sorry I don't have a web address. To give you a little background he was the Ithaca distributor in Canada. You could try Brownells or Numrich but these are US companies so the import issue comes back. |
Thanks, Chuck.
I'll investigate this possibility. Regards, Mark. Came late in life to shooting but is making up for lost time...
|
|
You can order their promotional products off their website. I have shirts,hats,bumper stickers,and the gun safe magnets. I think a blue jean jacket with the logo on the back would be great.
T.W.K. |
|
Aaagh, aaagh, aaaaaagh! It just got worse - my firing pin broke last Sunday.
So, it's a good job I've got more than one Ithaca, ain't it? Regards, Mark. Came late in life to shooting but is making up for lost time...
|
|
Hello, All.
Three weeks after my firing pin broke, the pin in my *other* M37 went the same way. No gun trader seemed to be willing to import spares for me so, once again, I hassled Ithaca themselves. The Good News is that they relented and, after a brief interlude to check my bona fides, they shipped me $95-worth of parts. (Total cost to me, including shipping, VAT and Customs "handling" fees: one hundred and twenty pounds.) I must send a big "Thank You" to Zak and Jeremiah for the services "above and beyond the call of duty". I've fitted all the parts and had a brief test of my PSG gun. All went well except that the red, plastic magazine follower reduced my round count by one, so I've reverted to the old metal one. The two cracks in the stock that my cousin epoxied for me even held together... In addition, I've managed to acquire a "posh" (ie, *blued*) M37. I've not had a chance to try that out, yet. Regards, Mark. Came late in life to shooting but is making up for lost time...
|
|
I'm glad it worked out for you. I have to say that Zak and Jeremiah are tops in my book, too.
--Jim
|
|
22 posts
• Page 1 of 1
Return to The Past, Present And Future Of Ithaca
Who is online
Users browsing this forum: No registered users and 4 guests