Ithaca Model 37 Accessories

Moderator: ripjack13

User avatar
Administrator
Posts: 667
Joined: Tue May 31, 2011 9:19 pm
Location: New York
PostPosted: Wed Jun 01, 2011 12:43 pm
This is a thread dedicated to Ithaca Model 37 accessories...

.22LR
Posts: 29
Joined: Wed Nov 16, 2011 5:24 pm
Location: Peoples Republic of California
PostPosted: Wed Nov 16, 2011 5:59 pm
Side folding stock for Ithaca 37 from Choate. I've had one for about 5 years and am impressed with it. It locks open very nicely with very little movement and is well made. It is a bit of pain to put on because of the way the butt-stock bolt is designed, but overall well worth the money.
Image
Image
http://www.riflestock.com/store/do/product/FSS/04-01-22

They also offer non-folding pistol grip stocks:
Image
http://www.riflestock.com/catalog_page_detail.cfm?recordno=7&Product_CatalogID=3059&ProductNumber=04%2D01%2D02&ProductCode=2&ProductSubCodeID=248&NewProduct=0

and adjustable LOP stocks:
Image
http://www.riflestock.com/store/do/product/04-01-12
Last edited by cindynles on Sat Sep 22, 2012 5:30 pm, edited 2 times in total.

.22LR
Posts: 29
Joined: Wed Nov 16, 2011 5:24 pm
Location: Peoples Republic of California
PostPosted: Sun Dec 18, 2011 3:06 pm
Here is the scope mount for Model 37s that are already drilled and tapped. It is the same screw pattern as the Remington 740, 742, and 760 (Weaver 62).

Image

Manfacturer site: http://www.egwguns.com/other-remingtons ... ope-mount/

Brownells stock number 296-000-095: http://www.brownells.com/.aspx/pid=2316 ... FOR-RIFLES

.22LR
Posts: 29
Joined: Wed Nov 16, 2011 5:24 pm
Location: Peoples Republic of California
PostPosted: Sun Dec 18, 2011 3:10 pm
SideSaddle for the Ithaca 37:

Image

Available at MidwayUSA:

http://www.midwayusa.com/product/513209 ... a-37-black

.

.22LR
Posts: 29
Joined: Wed Nov 16, 2011 5:24 pm
Location: Peoples Republic of California
PostPosted: Sun Dec 18, 2011 3:34 pm
Buttstock shell carrier. While this is not specific to Ithaca 37s this is one of the best ones I have used. It has an extra strap that goes around the recoil pad which keeps it from sliding up the stock during recoil. Well worth the $20.

http://www.skdtac.com/Eagle-Stock-Shotg ... ag.119.htm

Image
User avatar
.270 WIN
Posts: 116
Joined: Thu Dec 08, 2011 11:05 am
PostPosted: Sun Dec 18, 2011 4:30 pm
Ya that thing looks awesome!!!!! Way better than that crappy camo Velcro 1 I have, that I never use cause it sucks. Thx for sharing that

.22LR
Posts: 29
Joined: Wed Nov 16, 2011 5:24 pm
Location: Peoples Republic of California
PostPosted: Sun Dec 18, 2011 4:45 pm
For those willing to go the extra mile and track down one, here is the info on the discontinued Surefire Weapon Light (model 624) for the Ithaca 37:

Image
Image

.22LR
Posts: 29
Joined: Wed Nov 16, 2011 5:24 pm
Location: Peoples Republic of California
PostPosted: Sun Dec 18, 2011 7:16 pm
Sling Swivel Set (fits the barrel lug on DSPS and M&P models)

Image

http://www.midwayusa.com/product/114200 ... ge-1-black

.22LR
Posts: 29
Joined: Wed Nov 16, 2011 5:24 pm
Location: Peoples Republic of California
PostPosted: Mon Dec 19, 2011 8:33 pm
Pistol grip only stock:

Image

http://www.riflestock.com/catalog_page_ ... wProduct=0

.22LR
Posts: 29
Joined: Wed Nov 16, 2011 5:24 pm
Location: Peoples Republic of California
PostPosted: Mon Dec 19, 2011 8:47 pm
XS Big Dot Tritium Front Sight

Image

http://xssights.com/index.php?nID=sight ... ID=shotgun

.22LR
Posts: 29
Joined: Wed Nov 16, 2011 5:24 pm
Location: Peoples Republic of California
PostPosted: Tue Feb 14, 2012 10:04 pm
Looks like the Ithaca web site is selling swivel studs now.

For M&P, DSPS, and models with takedown barrels:
http://ithacagun.com/store/index.php?ma ... cts_id=190
Image

For fixed barrel defense models:
http://ithacagun.com/store/index.php?ma ... cts_id=191
Image

.22LR
Posts: 10
Joined: Sat Nov 17, 2012 2:15 pm
PostPosted: Sat Nov 17, 2012 3:15 pm
Hi I'm new to the forum, I have owned a "37" for many years, but have really never used it. Now I am looking to get a new rifled slug gun & the thought crossed my mind to purchase a rifled slug gun from Ithaca, My question is this a good idea? would I be getting the equivalent of a "DeerSlayer"? I have put this question to a few people and never get a good answer, so I thought I would ask the people who know! My reasoning is that the "37" is there, doing nothing but collecting dust, why not put it to use?
I looked at the Ithaca website & they offer both a standard barrel & a cantilever barrel, can my "37" be drilled & taped for a scope? or would I need the cantilever barrel?. ANY & ALL advise will be appreciated, Thanks msn

.270 WIN
Posts: 429
Joined: Sat Jan 21, 2012 8:50 am
PostPosted: Sat Nov 17, 2012 3:30 pm
Yes your gun could be drilled and taped for a scope mount but I personally would never do that for two reasons. First the value of the gun will go down. Second every time the barrel is removed you will lose your zero. By the time you spend the money to have the gun drilled and taped you could pay the difference in price for the cantilever barrel and you will not loose your zero when you take off the barrel to clean it.

.22LR
Posts: 10
Joined: Sat Nov 17, 2012 2:15 pm
PostPosted: Sat Nov 17, 2012 5:50 pm
1977cutcher wrote:Yes your gun could be drilled and taped for a scope mount but I personally would never do that for two reasons. First the value of the gun will go down. Second every time the barrel is removed you will lose your zero. By the time you spend the money to have the gun drilled and taped you could pay the difference in price for the cantilever barrel and you will not loose your zero when you take off the barrel to clean it.



Thanks, that is what i was thinking, What is your opinion, if I purchase the barrel from Ithaca would I have a gun that will perform as well as the "Deer SLayer"? or should I scrap the idea and just purchase a rifled shotgun?. I am not sure just what a barrel will cost from Ithaca but I see the price is over $300.00 on their website, That would be a good part of the cost of a new "Deerslayer" , but If I could get "Deer Slayer" performance by purchasing a barrel I think I would do it, Thanks again, msn
User avatar
.270 WIN
Posts: 116
Joined: Thu Dec 08, 2011 11:05 am
PostPosted: Sat Nov 17, 2012 10:33 pm
I have a "deerslayer" with a scope mounted to it.....drilled not cantilevered barrel. Works perfect!!!!!!!
User avatar
.270 WIN
Posts: 116
Joined: Thu Dec 08, 2011 11:05 am
PostPosted: Sat Nov 17, 2012 10:42 pm
ImageUploadedByTapatalk1353210118.757831.jpg
ImageUploadedByTapatalk1353210118.757831.jpg (40.03 KiB) Viewed 108509 times
ImageUploadedByTapatalk1353210129.403080.jpg
ImageUploadedByTapatalk1353210129.403080.jpg (79.25 KiB) Viewed 108509 times

.270 WIN
Posts: 429
Joined: Sat Jan 21, 2012 8:50 am
PostPosted: Sat Nov 17, 2012 11:24 pm
That gun has some nice figure in the stock. By the way I did not say that drilling and tapping the receiver would NOT work. I simply pointed out that by the time you pay to have it drilled and tapped plus the mount you could just about cover the cost difference of a cantilever barrel with out devaluing the gun.
User avatar
.270 WIN
Posts: 116
Joined: Thu Dec 08, 2011 11:05 am
PostPosted: Sun Nov 18, 2012 6:28 am
Oh no worries I wasn't trying to imply that, simply just saying it works good. :) the mount cost me $100 (Canadian) I believe. But you are very correct saying it does devalue your gun......but I'm ok with that...... Well gotta head out to the deer stand before it gets light ;)

.270 WIN
Posts: 429
Joined: Sat Jan 21, 2012 8:50 am
PostPosted: Sun Nov 18, 2012 7:17 am
A new DSII is running about $900. A rifle sighted barrel is running $275 while a cantilever barrel is running $325. The Ithaca split thread barrel system is the tightest lock up you can get with a removable barrel shotgun. You will gut very good results from it however that being said; you will never get quite as good results as a fixed barrel. Both systems will get the job done just fine.

Copper BB
Posts: 1
Joined: Mon Apr 08, 2013 7:19 am
PostPosted: Mon Apr 08, 2013 8:02 am
I am new to this site so I may be on the wrong thread or something but I am looking for a sling swivel for my "Choate Folder for Ithaca 37" Folding Stock (Code: 04-01-22) that can be removed for changing the sling more easily. Where the "Choate Folder" rear sling is located is too wide for standard sling swivels that I have found. Any ideas? Thanks!
User avatar
Copper BB
Posts: 6
Joined: Mon Nov 25, 2013 9:37 pm
Location: South Florida
PostPosted: Mon Nov 25, 2013 9:51 pm
Hello all-

I have inherited my Dads M87 DSPS 12ga. and its pretty much brand new judging by the gun shop's counter guy salivation...

I just have a few questions:

1) I purchased 3" shells for it and I'm only getting 6+1 of those suckers in there, but people are claiming 8+1 for that model?
How could I accurately measure the barrel without removing it?

2) I saw on Cabela's website a listing for a M37 "Tactical Pump" with an AR-style collapsible stock (not folding)... I don't see it listed on Ithaca's website or anywhere else for that mater... any links or leads anyone may have? I would much prefer the collapsible stock than the folder personally.

Thanks in advance and here are some Pics...
Attachments
Ithaca 3.jpg
Ithaca 3.jpg (48.19 KiB) Viewed 106081 times
Ithaca 2.jpg
Ithaca 2.jpg (39.05 KiB) Viewed 106081 times
Ithaca.jpg
Ithaca.jpg (50.89 KiB) Viewed 106081 times
User avatar
.270 WIN
Posts: 293
Joined: Sun Nov 25, 2012 8:44 am
PostPosted: Tue Nov 26, 2013 6:20 am
The way the ATF measures the barrel is to put a wooden dowel down the barrel to the breech block. mark the end of the barrel and measure. That is the legal length.

You can also simply measure from the end of the receiver to the barrel end and add 5/8 to the measurement. The actual measurement from the end of the barrel back to the shoulder is not quite 5/8's but 5/8's is close enough to use.

With an Ithaca 37, either method will be within 1/8 in or less of each other.
User avatar
Copper BB
Posts: 6
Joined: Mon Nov 25, 2013 9:37 pm
Location: South Florida
PostPosted: Tue Nov 26, 2013 9:34 am
Thank you for the reply... I will measure it tonight.

No off on the hunt for the elusive Tactical Stock.
User avatar
.270 WIN
Posts: 293
Joined: Sun Nov 25, 2012 8:44 am
PostPosted: Tue Nov 26, 2013 11:29 am
http://www.combatstocks.com/Choate_Itha ... _Stock.cfm
User avatar
Copper BB
Posts: 6
Joined: Mon Nov 25, 2013 9:37 pm
Location: South Florida
PostPosted: Wed Nov 27, 2013 10:42 pm
drcook wrote:http://www.combatstocks.com/Choate_Ithaca_37_Side_Folding_Stock.cfm


Thanks!

Return to Ithaca Model 37

Who is online

Users browsing this forum: No registered users and 10 guests